Yamaha Waverunner VXS VX1800 Service Manual page 99

1
1
14. Disconnect the fuel pump module coupler
"a".
a
15. Remove the wire harness from the plastic
ties "1".
1
16. Disconnect the cooling water hose "1" from
the oil cooler.
1
17. Disconnect the cooling water hose "1" from
the thermostat housing.
1
1
18. Remove the plastic tie "2", and then dis-
connect the RiDE motor couplers "a" and
"b".
a
19. Place a rag under the oil filter "1", and then
remove the oil filter "1".
TIP:
Make sure to clean up any oil spills.
1
Oil filter wrench "2"
90890-06830
Oil filter wrench "2"
YB-06830
20. Remove the plastic tie "1", and then dis-
connect the thermo sensor coupler "a".
21. Disconnect the cooling water hoses "1",
"2", and "3".
22. Remove the rectifier/regulator "4".
5-8
b
1
a
2
1
1
Engine mount
2
a