Starting system
Fuse check
1. Check the fuse for continuity. Replace if
there is no continuity.
Handlebar switch (left) check
1. Disconnect the handlebar switch (left) cou-
pler (white coupler).
2. Check the engine start switch for continui-
ty. Replace the handlebar switch (left) if
out of specification.
2
A
1
2
B
Engine start switch continuity
Engine start
Clip "1"
switch "2"
Free
Installed "A"
Pushed
Free
Removed
"B"
Pushed
3. Connect the handlebar switch (left) cou-
pler (white coupler).
4. Disconnect the handlebar switch (left) cou-
pler (black coupler).
5. Check the engine stop switch for continui-
ty. Replace the handlebar switch (left) if
out of specification.
R
Br
Red (R)–
Brown (Br)
No continuity
Continuity
No continuity
No continuity
1
A
2
B
2
Engine stop switch continuity
Clip "1"
Installed "A"
Removed
"B"
6. Connect the handlebar switch (left) cou-
pler (black coupler).
Main relay check
1. Remove the fuse box cover and main relay
"1".
1
2. Connect the positive battery lead to the
terminal "a", and the negative battery lead
to the terminal "b", and then check for con-
tinuity between the terminals "c" and "d".
Replace the relay if there is no continuity.
Do not reverse the battery leads. Other-
wise, the relay may be seriously damaged.
7-31
Starting system
W
B
Engine stop
White (W)–
switch "2"
Black (B)
Free
No continuity
Pushed
Continuity
Free
Continuity
Pushed
Continuity