Test Lead Preparation - Yamaha Waverunner VXS VX1800 Service Manual

• Use the peak voltage adapter with the rec-
ommended digital circuit tester.
• Connect the positive pin of the peak voltage
adapter to the positive terminal of the digital
circuit tester, and the negative pin to the neg-
ative terminal.
• When measuring the peak voltage, set the
selector on the digital circuit tester to the DC
voltage mode.
A
DC V
B
V
3
A. Worldwide
B. U.S.A. and Canada
Digital circuit tester "1"
90890-03243
Peak voltage adapter B "2"
90890-03172
Digital multimeter "3"
YU-34899-A
Peak volt adapter "4"
YU-39991

Test lead preparation

If the special service tool test harness is not
available, make test leads suitable for the mea-
surement.
1
2
4
7-10
1
Test lead
Terminal, male "1"
9E212-10303
Terminal, female "2"
9E212-11303
Terminal, female "3"
(commercially available)
Electrical analysis
2
3