Igmp Proxy Config - THOMSON TG605s Cli Reference Manual

igmp Commands

igmp proxy config

Configure the IGMP proxy.
SYNTAX:
igmp proxy config
where:
state
qi
qri
lmqi
rv
advinter
initadvinter
initadvcount
requirera
localgroup
E-DOC-CTC-20080409-0002 v2.0
[state = <{disabled|enabled}>]
[qi = <number{1-86400}>]
[qri = <number{1-3175}>]
[lmqi = <number{1-3175}>]
[rv = <number{2-10}>]
[advinter = <number{4-180}>]
[initadvinter = <number{1-4}>]
[initadvcount = <number{1-10}>]
[requirera = <{disabled|enabled}>]
[localgroup = <{disabled|enabled}>]
Enable/Disable the IGMP proxy.
The interval in seconds between general queries
sent by the querier.
The maximum response time in seconds for an
IGMP client in reply to general queries.
The maximum response time in seconds for an
IGMP client in reply to group specific queries.
The robustness variable allows tuning for
expected IGMP packet loss.
The interval in seconds for unsolicited MRD
advertisements (see rfc4286).
The interval in seconds for initial unsolicited
MRD advertisements (see rfc4286).
The maximum number of initial unsolicited MRD
advertisements (see rfc4286).
Enable/Disable the router alert IP option check.
Enable/Disable the processing of a local
multicast group in an IGMP packet.
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
483