Telnet Command - THOMSON TG605s Cli Reference Manual

telnet Command

telnet Command
Open a telnet connection to a server.
SYNTAX:
telnet
where:
addr
port
E-DOC-CTC-20080409-0002 v2.0
addr = <ip-address>
port = <{at-echo|at-nbp|at-rtmp|at-zis|auth|
bgp|biff|bootpc|bootps|chargen|data|gopher|
h323|httpproxy|ike|ils|imap2|imap3|ingres-
net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|
login|netbios-dgm|netbios-ns|netbios-ssn|
netwall|netware-ip|new-rwho|nfds|nicname|nntp|
ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|
realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|
snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|
sunrpc|syslog|systat|talk|telnet|...} or
number>
The IP address of the server.
The port to connect to.
REQUIRED
REQUIRED
867