Igmp Proxy Config - THOMSON TG587n Reference Manual

Wireless-n multi-service adsl2+ gateway

Hide thumbs Also See for TG587n:

Table of Contents

igmp Commands

igmp proxy config

Configure the IGMP proxy.

igmp proxy config

initadvinter

initadvcount

E-DOC-CTC-20080619-0003 v1.0

[state = <{disabled|enabled}>]

[qi = <number{1-86400}>]

[qri = <number{1-3175}>]

[lmqi = <number{1-3175}>]

[rv = <number{2-10}>]

[advinter = <number{4-180}>]

[initadvinter = <number{1-4}>]

[initadvcount = <number{1-10}>]

[requirera = <{disabled|enabled}>]

[localgroup = <{disabled|enabled}>]

Enable/Disable the IGMP proxy.

The interval in seconds between general queries

sent by the querier.

The maximum response time in seconds for an

IGMP client in reply to general queries.

The maximum response time in seconds for an

IGMP client in reply to group specific queries.

The robustness variable allows tuning for

expected IGMP packet loss.

The interval in seconds for unsolicited MRD

advertisements (see rfc4286).

The interval in seconds for initial unsolicited

MRD advertisements (see rfc4286).

The maximum number of initial unsolicited MRD

advertisements (see rfc4286).

Enable/Disable the router alert IP option check.

Enable/Disable the processing of a local

multicast group in an IGMP packet.