Firewall Debug Traceconfig - THOMSON TG605s Cli Reference Manual

firewall debug traceconfig

Display/Modify firewall trace configuration.
SYNTAX:
firewall debug traceconfig
where:
tcpchecks
udpchecks
icmpchecks
sink
forward
source
410
[tcpchecks = <{disabled|enabled}>]
[udpchecks = <{disabled|enabled}>]
[icmpchecks = <{disabled|enabled}>]
[sink = <{none|all|accept|deny|drop|reset} or
number>]
[forward = <{none|all|accept|deny|drop|reset}
or number>]
[source = <{none|all|accept|deny|drop|reset}
or number>]
Disable/Enable tcpchecks traces.
Disable/Enable udpchecks traces.
Disable/Enable icmpchecks traces.
The action the firewall traces for sink traffic.
The action the firewall traces for forward traffic.
The action the firewall traces for source traffic.
firewall Commands
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20080409-0002 v2.0