Dhcp Client Ifconfig - THOMSON TG605s Cli Reference Manual

dhcp Commands

dhcp client ifconfig

Configure a DHCP client.
SYNTAX:
dhcp client ifconfig
where:
intf
label
metric
dnsmetric
broadcast
serverroute
followlabel
E-DOC-CTC-20080409-0002 v2.0
intf = <{wan1}>
[label = <{None|DSCP|Interactive|Management|
Video|VoIP-RTP|VoIP-Signal|default}>]
[metric = <number{0-255}>]
[dnsmetric = <number{0-100}>]
[broadcast = <{disabled|enabled}>]
[serverroute = <{disabled|enabled}>]
[followlabel = <{disabled|enabled}>]
The name of the dynamic interface to be
configured.
Label for default gateway and static routes.
Route metric for default gateway and static
routes.
DNS route metric.
Operate client in unicast/broadcast mode.
Insert a route for the DHCP server IP
If enabled the DHCP client's unicast traffic will
follow the route label specified. If disabled DHCP
unicast traffic will follow standard routes
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
137