Ipqos Meter Config - THOMSON TG605s Cli Reference Manual

ipqos Commands

ipqos meter config

Modify an IP QoS meter configuration.
SYNTAX:
ipqos meter config
where:
name
label
intf
droprate
markrate
burst
dropaction
markaction
tosmarking
tos
dscp
precedence
E-DOC-CTC-20080409-0002 v2.0
name = <{}>
[label = <{DSCP|Interactive|Management|Video|
VoIP-RTP|VoIP-Signal|default}>]
[intf = <{loop|ipsec0|lan1|wan1|dmz1|guest1}>]
[droprate = <number{0-102400}>]
[markrate = <number{0-102400}>]
[burst = <number{0-64}>]
[dropaction = <{count|drop}>]
[markaction = <{count|mark}>]
[tosmarking = <{disabled|enabled}>]
[tos = <number{0-255}>]
[dscp = <{ef|af11|af12|af13|af21|af22|af23|
af31|af32|af33|af41|af42|af43|cs0|cs1|cs2|cs3|
cs4|cs5|cs6|cs7} or number>]
[precedence = <{routine|priority|immediate|
flash|flash-override|CRITIC-ECP|internetwork-
control|network-control} or number>]
[classification = <{decrease|overwrite|ignore|
offset}>]
[class = <number{0-15}>]
The name of the IP QoS meter.
The name of the label.
The name of the interface.
The drop rate in kilo bits per second (Kbps).
The mark rate in kilo bits per second (Kbps).
The burst size in kilo bytes (KB).
The drop action.
The mark action.
Enable tos marking for marked packets.
The type of service used for tos marking.
The diffserv code point (part of tos, used for tos-
marking).
The precedence (part of tos, used for tos-
marking).
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
541