Ppp Commands - THOMSON TG605s Cli Reference Manual

ppp Commands

ppp Commands
ppp bundle add
ppp bundle config
ppp bundle delete
ppp bundle flush
ppp bundle ifadd
ppp bundle ifdelete
ppp bundle list
ppp bundle rtadd
ppp bundle rtdelete
ppp flush
ppp ifadd
ppp ifattach
ppp ifconfig
ppp ifdelete
ppp ifdetach
ppp iflist
ppp ifscan
ppp relay flush
ppp relay ifadd
ppp relay ifconfig
ppp relay ifdelete
ppp relay iflist
ppp relay sesslist
E-DOC-CTC-20080409-0002 v2.0
Add a new bundle of interfaces.
Modify the configuration of a bundle
Delete a bundle of interfaces.
Flush all bundles.
Add an interface on a bundle.
Remove an interface from a bundle.
Display the current bundles.
Add a route to the routing table when
bundle comes up
Delete a route from the routing table
when bundle goes down
Flush all PPP interfaces.
Create a new PPP interface.
Attach a PPP interface.
Modify a PPP interface.
Delete a PPP interface.
Detach a PPP interface.
Display the PPP interfaces.
Scan a PPP interface for available
interfaces.
Remove all ethernet interfaces from
the PPP relay agent list and terminate
all
Add an ethernet interface to the PPP
relay list.
Modify an ethernet interface from the
PPP relay agent list.
Delete an ethernet interface from the
PPP relay agent list.
Display all ethernet interfaces added
to the PPP relay agent list.
Display all active PPP relay sessions.
see page 727
see page 728
see page 730
see page 731
see page 732
see page 733
see page 734
see page 735
see page 736
see page 737
see page 738
see page 739
see page 740
see page 743
see page 744
see page 745
see page 746
see page 747
see page 748
see page 749
see page 750
see page 751
see page 752
725