Snmp Commands - THOMSON TG605s Cli Reference Manual

snmp Commands

snmp Commands
snmp community add
snmp community delete
snmp community list
snmp community modify
snmp config
snmp get
snmp getnext
snmp ifadd
snmp ifattach
snmp ifconfig
snmp ifdelete
snmp ifdetach
snmp iflist
snmp walk
E-DOC-CTC-20080409-0002 v2.0
Config an SNMP community string to
allow snmp access over IP.
Delete an SNMP community string to
prevent snmp access over IP.
List all SNMP community strings in
use for snmp access over IP.
Modify an SNMP community string to
allow snmp access over IP.
Configure global SNMP parameters.
Get from supplied object identity. e.g.
get objectid=.1.3.6.1.2.1.1.1.0
Get next from supplied object
identity. e.g. getnext objectid=
Create a new SNMP interface.
Attach an SNMP interface.
Modify an SNMP interface.
Delete an SNMP interface.
Detach an SNMP interface.
Display the SNMP interfaces.
Walk from supplied object identity.
e.g. walk objectid=.1.3.6.1.2.1.1
see page 796
see page 797
see page 798
see page 799
see page 800
see page 801
see page 802
see page 803
see page 804
see page 805
see page 806
see page 807
see page 808
see page 809
795