atm Commands
atm qosbook ctdadd
Add a new connection traffic descriptor.
SYNTAX:
atm qosbook ctdadd
where:
name
conformance
peakrate
sustrate
maxburst
minrate
maxframe
celldelay
realtime
framediscard
E-DOC-CTC-20080409-0002 v2.0
name = <string>
conformance = <{UBR|CBR|VBR|UBR.1|UBR.2|
UBR.mdcr|CBR.1|VBR.1|VBR.2|VBR.3|VBR.c|VBR.nt|
VBR.t|GFR.1|GFR.2}>
[peakrate = <number{0-27786}>]
[sustrate = <number{0-27786}>]
[maxburst = <number{48-12240}>]
[minrate = <number{0-27786}>]
[maxframe = <number{0-255}>]
[celldelay = <number>]
[realtime = <{enabled|disabled}>]
[framediscard = <{enabled|disabled}>]
The name for the new CTD entry.
The ATM service conformance definition.
The peak rate (in kilobits per second). Use '0' to
indicate linerate for UBR.
The sustainable rate (in kilobits per second).
(VBR only)
The maximum burst size (in bytes). (VBR or GFR)
The minimum rate (in kilobits per second).
(UBR.m or GFR)
The maximum frame size (in bytes). (GFR only)
Cell delay variation in tenths of microseconds.
Enable/disable realtime traffic (VBR only).
Enable/disable frame discard.
REQUIRED
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
79