Adsl Config - THOMSON SPEEDTOUCH 510I - REFERENCE GUIDE RELEASE 4.0 Reference Manual

ADSL Commands

adsl config

Show/set the Asymmetric Digital Subscriber Line (ADSL) configuration.
Although the same command for both SpeedTouch
command features specific parameter values per variant:
SYNTAX FOR ADSL/Plain Old Telephone Service (POTS) variants:
adsl config
[opermode]
maxbitspertoneUS
SYNTAX FOR ADSL/Integrated Services Digital Network (ISDN) variants:
adsl config
[opermode]
maxbitspertoneUS
Executing the :adsl config without specifying parameters, shows the current ADSL configuration.
Note
26
TM
ADSL/POTS and SpeedTouch
[opermode = <{ansi|g.dmt_annex_a|g.lite|multimode}>]
[maxbitspertoneUS = <number{10-14}>]
The operational mode of the SpeedTouch
Choose between:
ansi
•
g.dmt_annex_a
•
g.lite
•
multimode
•
By default the SpeedTouch
A number between 10 and 14 (bits per tone).
Represents the maximum number of bits which can be allocated to
each ADSL DMT tone in the upstream direction.
By default the modem will use up to 13 bits per tone.
[opermode = <{etsi|g.dmt_annex_b|multimode}>]
[maxbitspertoneUS = <number{10-14}>]
The operational mode of the SpeedTouch
Choose between:
ansi
•
g.dmt_annex_b
•
multimode
•
By default the SpeedTouch
A number between 10 and 14 (bits per tone).
Represents the maximum number of bits whic hcan be allocated to
each ADSL DMT tone in the upstream direction.
By default the modem will use up to 13 bits per tone.
TM
TM
modem.
TM
will start in multimode.
TM
modem.
TM
will start in multimode.
ADSL/ISDN variants, the
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-SIT-CTC-20021203-0003 v1.0