Service System Modify - THOMSON TG605s Cli Reference Manual

service Commands

service system modify

Modify a service.
SYNTAX:
service system modify
where:
name
state
port
qoslabel
routelabel
srcintf
log
forward
natpmweight
E-DOC-CTC-20080409-0002 v2.0
name = <{PPTP|PPTPD|PPTPGRE|SNTP|SYSLOG|HTTP|
HTTPs|HTTPI|TFTP-C|FTP|SSH|SSDP|MDAP|CWMP-C|
CWMP-S|GRE|IPIP|IKE|IKE-NAT-T|ESP|RAS|SRAS|
IP_COMMANDS|PING_RESPONDER}>
[state = <{disabled|enabled}>]
[port = <{at-echo|at-nbp|at-rtmp|at-zis|auth|
bgp|biff|bootpc|bootps|chargen|data|gopher|
h323|httpproxy|ike|ils|imap2|imap3|ingres-
net|ipcserver|ipx|irc-o|irc-u|kerberos|ldap|
login|netbios-dgm|netbios-ns|netbios-ssn|
netwall|netware-ip|new-rwho|nfds|nicname|nntp|
ntalk|ntp|pcmail-srv|pop2|pop3|printer|qotd|
realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|
snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|
sunrpc|syslog|systat|talk|telnet|...} or
number>]
[qoslabel = <{None|DSCP|Interactive|
Management|Video|VoIP-RTP|VoIP-Signal|
default}>]
[routelabel = <{None|DSCP|Interactive|
Management|Video|VoIP-RTP|VoIP-Signal|
default}>]
[srcintf = <{loop|ipsec0|lan1|wan1|dmz1|
guest1}>]
[log = <{disabled|enabled}>]
[forward = <{disabled|enabled}>]
[natpmweight = <number{0-255}>]
The name of the service.
Disable/Enable this service.
The port of the service.
QOS label for service data.
Route label for service data.
The primary ip interface for this service.
Disable/Enable service logging.
Disable/Enable service forwarding.
The nat portmap weight for this service.
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
793