Ppp Bundle Config - THOMSON TG605s Cli Reference Manual

ppp bundle config

Modify the configuration of a bundle
SYNTAX:
ppp bundle config
where:
name
class
pool
epdtype
epdlocaladdr
epdglobalmac
epdipv4
mrru
ssnhf
laddr
728
name = <{}>
[class = <{0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|
15}>]
[pool = <{none}>]
[epdtype = <{null|localaddr|ipv4|globalmac}>]
[epdlocaladdr = <string>]
[epdglobalmac = <hardware-address>]
[epdipv4 = <ip-address>]
[mrru = <number{293-8192}>]
[ssnhf = <{disabled|enabled}>]
[laddr = <ip-address>]
[raddr = <ip-address>]
[netmask = <ip-mask(dotted or cidr)>]
[format = <{cidr|dotted|none}>]
[primdns = <ip-address>]
[secdns = <ip-address>]
[dnsmetric = <number{0-100}>]
The name of the bundle
The prio class of the PPP packets.
Acquire IP subnet and assign it to a free DHCP
pool.
Specifies the address space used to identify the
endpoint
Specifies the serial device number used as
endpoint discriminator
Specifies the MAC address used as endpoint
discriminator
Specifies the IPv4 address used as endpoint
discriminator
Negotiate maximum reassembled packet size we
can handle.
Try to negotiate short sequence number header
format
Negotiate this IP address at our side of the link.
ppp Commands
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20080409-0002 v2.0