Setting Up The Copy Selections; Reduce/Enlarge - Xerox Wide Format 6604 User Manual

5. If there are Document Catch Guides in the front of the machine, you may wish to
guide the lead edge of the documents as they travel downward into the guides.
NOTE
Refer to the key points about additional Media Source options later in this chapter
under Setting Up Basic Copying selections, Media Source.

Setting Up the Copy Selections

When the requirements of a particular copy job differ from the machine default settings,
you can make job-specific changes on the Basic Copy, Image Quality and More Features
tabs.
The following options may be selected from the Basic Copy tab:

• Reduce/Enlarge

• Original Type
• Media Source
• Output Format
• Collation and Check Plot
• Scan Display
• Printer Interrupt
• Scanned Image
To access the Copy screen and the Basic Copy tab:
1. Select Copy on the Services menu.
2. Select the required features from the Basic Copy tab.
Reduce/Enlarge
The Reduce/Enlarge feature has variable options for scaling the images being copied.
The Copy Option feature provides the ability to customize the preset
reduction/enlargement settings beyond the basics discussed here.
Refer to the System Administration chapter under Copy Options, Select Custom Reduction
and Enlargement for more details.
The factory default setting is 100%. Once a job has been scaled to a different percentage,
that percentage then becomes the new image and setting. This is seen during Job Recall
and is considered 100% of the document.
®
Xerox Wide Format 6604/6605 Solution
User Guide
Printing and Copying Documents
2-9