Setting Copy Options - Xerox DocuPrint CM205 b User Manual

Setting Copy Options

Set the following options for the current copy job before pressing the
copies.
NOTE:
• After a copy job is completed, the copy options would be kept until the screen returns to Select Function
(auto-reset or the
button is pressed again.
This section includes:
• "Number of Copies" on page 117
• "Color" on page 118
• "Collated" on page 119
• "Reduce/Enlarge" on page 120
• "Document Size" on page 122
• "Original Type" on page 123
• "Lighten/Darken" on page 124
• "Sharpness" on page 125
• "Auto Exposure" on page 126
• "Color Balance R" on page 127
• "Color Balance G" on page 128
• "Color Balance B" on page 129
• "Gray Balance" on page 130
• "N-Up" on page 131
• "Margin Top/Bottom" on page 133
• "Margin Left/Right" on page 134
• "Margin Middle" on page 135
(Back) button is pressed), the CA (Clear All) button is pressed, or the
(Start) button to make
(Copy)
Copying 116