Updating The Software; Update Procedure Using Usb Flash Drive; Update Procedure Using Computer - Brother 891-Z02 Operation Manual

UPDATING THE SOFTWARE

Using a USB flash drive or a computer, the
machine's software can be updated. For update
information, refer to details posted on the Brother
Solutions Center (http://support.brother.com). If an
upgrade file is posted, download the file, and then
update the machine according to the following
procedure.
Update Procedure Using USB Flash
Drive
a
While holding down
panel, press to turn on the machine.
b
Plug the USB flash drive containing the upgrade
file into the USB port on this machine.
The USB flash drive must not contain any data other
than the upgrade file. Otherwise, the machine may
stop operating correctly.
Note
• This machine is incompatible with a USB hub.
Plug the USB flash drive directly into the USB
port.
c
Touch .
a
a Update using USB flash drive
in the operation
d
Touch the "Update" key to start the update.
When updating is finished, the completion
message appears.
e
Unplug the USB flash drive from the port.
f
Turn the machine off, then on again.

Update Procedure Using Computer

For Computers and Operating Systems and USB
cable, see "Saving Patterns in the Computer" on
page 51.
a
While holding down
panel, press to turn on the machine.
The following screen will appear on the LCD.
b
Touch .
a Update using computer
c
Plug the USB cable connector into the
corresponding USB ports for the computer and
for the machine.
"Removable Disk" will appear in "Computer (My
computer)".
in the operation
a
89
5