Selecting The Area To Be Saved - Brother 891-Z02 Operation Manual

Selecting the Area to be Saved

When saving a scanned image to a USB flash drive,
the desired scanning area can be specified.
a
a
Follow steps through
of "Tutorial 5- Scanning to USB" on page 73.
b
Select "Custom", and then touch the "OK" key.
c
Using the touch pen, drag
scanning area, and then touch the "OK" key.
• The scanning area (white area) can also be dragged
to move it.
Memo
• Load the mat with the original to be scanned
attached, and then touch
the mat in the screen. The scanning area can be
selected while viewing the displayed image.
• On models compatible with 24-inch scanning,
the mat size key (
key: With each press of the key, the mat size
setting switches between 12" × 12" (305 mm ×
305 mm) and 12" × 24" (305 mm × 610 mm).)
d
g
Continue from step
"Tutorial 5- Scanning to USB".
e
in "Scan Settings"
to select the
to display
) appears. (Mat size
in "Scan Settings" of
4
75