Download Print this page

Mat And Material Combinations - Brother 891-Z02 Operation Manual

Hide thumbs

Advertisement

Mat and Material Combinations

The recommended material thickness is 0.1 mm to 0.3 mm for paper and 0.2 mm to 1.5 mm for fabric. Refer to
the following table for the appropriate mat and sheet for fabric cutting according to the material to be used for
cutting or drawing. Depending on the machine model, some accessories listed in the chart may not be included.
In that case, they must be purchased separately.
Material and its thickness
Printer paper
80 g/m² (0.1 mm)
Scrapbook paper
(thin)
Scrapbook paper
(medium-thick)
Cardstock (thin)
Cardstock
(medium-thick)
Vellum, tracing
paper
Poster board
(thin)
Poster board
(thick)
Thin cotton fabric
(for quilt piece)
Thin cotton fabric
(except for quilt
piece)
Flannel (for quilt
piece)
Flannel (except
for quilt piece)
Felt
Denim 14 oz
Plastic sheet (PP)
Vinyl
Magnet
Sticker or seal
*
When cutting smooth paper
Note
• This chart is only a guide, always test material and mat strength prior to beginning project.
16
Standard mat
(purple and
turquoise)
120 g/m²
(0.15 mm)
200 g/m²
(0.25 mm)
200 g/m²
(0.25 mm)
280 g/m²
(0.35 mm)
0.07 mm
280 g/m²
(0.35 mm)
400 g/m²
(0.5 mm)
0.25 mm
0.25 mm
0.6 mm
0.6 mm
1 mm
0.75 mm
0.2 mm
0.2 mm
0.3 mm
0.2 mm
Mat
Middle tack
Low tack
adhesive mat
adhesive
(pink and
mat (turquoise)
turquoise)
*
*
*
Sheet for fabric cutting
Iron-on fabric
High tack
appliqué
adhesive
contact
fabric support
sheet (white
sheet
backing)

Advertisement

loading

  Also See for Brother 891-Z02

This manual is also suitable for:

891-z03891-z04