Table of Contents
Advertisement
Touch the pattern to be recalled and display a
preview of the pattern layout.
c Recall from the computer.
Touch the pattern to be recalled and display a
preview of the pattern layout. For details, see
“Recalling from the Computer” on page 53.
Note
• If the name of the data file/folder cannot be
identified, for example, when the name contains
special characters, the file/folder is not
displayed. If this occurs, change the name of
the file/folder. We recommend using the 26
letters of the alphabet (uppercase and
lowercase), the numbers 0 through 9, “-” and
“_”.
c
Check the preview of the pattern layout in the
screen, and then touch the “OK” key.
a
b
d
c
a Touch to return to the list of patterns at the
destination.
b Touch to delete the data for the displayed
pattern layout.
c Touch to recall the pattern layout data.
d Touch to display the patterns in zoom mode.
Memo
• Even if a seam allowance has been saved with
the pattern(s) (see “Cutting Around Drawings”
on page 57), the “Seam Allowance” setting
specified in the settings screen will have priority
and will be applied. If necessary, adjust the
“Seam Allowance” setting in the settings screen
(see “Seam Allowance” on page 31).
Recalling from the Computer
For Computers and Operating Systems and USB
cable, see “Saving Patterns in the Computer” on
page 51.
a
Plug the USB cable connector into the
corresponding USB ports for the computer and
for the machine.
b
On the computer, open “Computer (My
computer)” then go to “Removable Disk”.
3
c
Move/copy the pattern data to “Removable
Disk”.
Pattern data in “Removable Disk” is written to the
machine.
Note
• While data is being written, do not disconnect
the USB cable.
• Do not create folders within “Removable Disk”.
Since folders are not displayed, pattern data
within folders cannot be recalled.
Page 53
Advertisement
Table of Contents
