Download  Print this page

Cleaning The Scanner Glass - Brother 891-Z02 Operation Manual

Hide thumbs

Advertisement

b
Using a commercially available brush, clean off
cuttings, lint and dust.
Specifically clean off lint and dust around the blade. If
lint and dust accumulate between the blade and
holder, the blade may no longer rotate or the cutting
quality may become poor.
c
Attach the holder cap to the holder.
For details on attaching the holder cap, see "Installing"
on page 77.
■ Cleaning Inside the Machine
If there are vertical lines or blank areas in the scanned
image, lint or dust may have accumulated in the
machine. The Lint may also attach to the surface of the
feed rollers, preventing a mat to be loaded or unloaded
correctly. Use a soft brush to clean it.
a
Turn off the machine and disconnect the power
cord plug, and then disconnect the AC adapter
plug from the DC power jack on the back of the
machine.
b
Open the cover on the front of the machine.
c
Remove the holder from the carriage.
d
Use a commercially available brush to clean
around the feed slot and the carriage.

Cleaning the Scanner Glass

If there are unwanted vertical lines in the scanned
image or if scanning cannot be done cleanly, the
scanning area of the scanner may have become
dirty. Clean the scanner glass at the bottom of the
machine.
a
Turn off the machine and disconnect the power
cord plug, and then disconnect the AC adapter
plug from the DC power jack on the back of the
machine.
5
79

Advertisement

Table of Contents

   Also See for Brother 891-Z02

This manual is also suitable for:

891-z03891-z04

Comments to this Manuals

Symbols: 0
Latest comments: