Table of Contents
Advertisement
b Color recognition mode
The cutting data is created without converting the
illustration to grayscale.
Creating data in this mode may take some time.
*
The default color recognition setting is the
grayscale recognition mode.
Examples of illustrations appropriate for
recognition mode:
Example
Outlines that are
clear
• Distinct
difference in
brightness
between
background
and illustration
• Different
brightness of
adjacent colors
• Similar
brightness of
adjacent colors
Memo
• The edges of adjacent colors with the same
brightness, as shown below, cannot be
detected. In this case, use the color recognition
mode.
a
a
b
c
d
a "a" and "b" as well as "c" and "d" have the
same brightness.
d
Recommended
recognition
mode
e
Grayscale
recognition mode
Color recognition
mode
Attach the original to the mat, and then load
the mat into the feed slot.
• Lightly insert the mat into the feed slot, and press in
the operation panel.
• For details on loading the mat, see "Loading the
Mat" on page 27.
Memo
• Depending on the machine model, the sizes of
mats that can be used will differ. Check the
"Maximum Scanning Area" under "Machine
Information" on page 5 of the settings screen.
Press the "Start/Stop" button to start scanning.
When scanning is finished, the scanned image
appears in the screen.
4
67
Advertisement
Table of Contents
