Table of Contents
Advertisement
UPGRADING THE SOFTWARE
Using a USB flash drive, the machine's software can
be upgraded. For upgrade information, refer to
details posted on the Brother Solutions Center (http://
solutions.brother.com/). If an upgrade file is posted,
download the file, and then upgrade the machine
according to the following procedure.
a
While holding down
panel, press
to turn on the machine.
b
Plug the USB flash drive containing the upgrade
file into the USB port on this machine.
The USB flash drive must not contain any data other
than the upgrade file. Otherwise, the machine may
stop operating correctly.
Note
• This machine is incompatible with a USB hub.
Plug the USB flash drive directly into the USB
port.
c
Touch the "Update" key to start the upgrade.
When upgrading is finished, the completion
message appears.
d
Unplug the USB flash drive from the port.
e
Turn the machine off, then on again.
66
in the operation
OPTIONAL ACCESSORIES
The following are available as optional accessories
to be purchased separately.
1.
2.
4.
5.
7.
8.
10.
11.
13.
14.
No.
Part Name
Low tack adhesive mat 12" × 12"
1
(305 mm × 305 mm) (turquoise)
Low tack adhesive mat 12" × 24"
2
(305 mm × 610 mm) (turquoise)
Standard cut blade holder
3
(turquoise) (with no blade)
4
Standard cut blade
Scanning mat 12" × 12"
5
(305 mm × 305 mm)
Standard mat 12" × 12"
6
(305 mm × 305 mm)
(turquoise and purple)
Standard mat 12" × 24"
7
(305 mm × 610 mm)
(turquoise and purple)
Deep cut blade holder (purple)
8
(with no blade)
9
Deep cut blade
10
Pen holder
11
Color pen set
12
Erasable pen set
13
Contents USB
Iron-on fabric appliqué contact
14
sheet (white backing)
High tack adhesive fabric support
15
sheet (light blue backing)
*
Contact the retailer who sold you this machine or
the nearest authorized service center.
3.
6.
9.
12.
15.
Part Code
CAMATP12
CAMATP24
CAHLP1
CABLDP1
CAMATS12
CAMATF12
CAMATF24
CAHLF1
CABLDF1
CAPENHL1
CAPEN1
CAPEN2
*
CASTBL1
CASTBL2
Advertisement
Table of Contents
