Updating The Software; Automatic Update Function - Brother SDX325 Operation Manual

UPDATING THE SOFTWARE

The machine's software can be updated with any of
the following three procedures.
Updating Using Automatic Update Function
●
- Updating from the Home Screen
- Updating from the Settings Screen
Updating Using a USB Flash Drive
●
Updating Using the Application
●
(CanvasWorkspace)

Automatic Update Function

The machine can be updated by retrieving update
files directly from the Internet.
Memo
• Before using this function, register your
machine with CanvasWorkspace, and connect
the machine to the network. For details on
registering, refer to "WIRELESS NETWORK
CONNECTION FUNCTION" on page 85.
■ Updating from the Home Screen
a
Touch in the home screen.
• If there is no new update file,
in the home screen.
b
Touch the "Update" key to retrieve the
software.

When the update is finished, the machine
automatically restarts.
Note
• Do not turn off the machine while it is being
updated.
■ Updating from the Settings Screen
a
Touch
settings screen, and then touch the "Ver."
button.
b
Touch
c
Updating begins.
does not appear
• Refer to step
in the home screen to display the

The update method selection screen appears.
.
a
a Update automatically
b
in "Updating from the Home
Screen".

If there is no new update file, the following
message appears.
Note
• If the automatic update fails, retrieve the update
file from the Brother support website (http://
s.brother/cuoad/), and then update your
machine using a USB flash drive.
7
119