Modifying An Ethernet Port Policy - Symbol WS5000 series Reference Manual

4-40
WS5000 Series Switch System Reference Guide

4.4.4.2 Modifying an Ethernet Port Policy

To modify an existing Ethernet Port Policy, follow these steps:
1. From the WS5000 Series Switch GUI main window, select Modify > Ethernet > Existing Policy. The
system launches the Ethernet Policy Manager.
Figure 4.45 Modifying an Existing Ethernet Policy—Ethernet Policy Manager
2. This panel lists all available Ethernet policies configured on the system.
and options within this panel. To edit a policy, select the policy name in the left pane first.
Table 4.14 Ethernet Policy Manager Fields and Controls
Field or Control Description
Name Name of the selected Ethernet Policy.
Description Description of the selected Ethernet Policy, if available.
VLANs Interface configurations in the policy tree.
Properties Displays the the LANs or VLANs associated with the selected Ethernet policy.
Launches the Ethernet Policy Wizard to create a new Ethernet Policy. See
Create
Policy on page 4-37
Delete Removes the selected policy from the system. A dialog appears to confirm this action.
Edit Opens a variation of the Ethernet Policy Wizard, for editing it in the same fashion that it was
created. See
Close Closes the Ethernet Policy Manager without saving any changes.
3. When done, click Next. An Ethernet Policy Updated Successfully! message panel is displayed.
4. Click Finish to save the updated Ethernet Policy and exit the wizard.
5. Click Close in the Ethernet Policy Manager panel.
for more details.
Creating an Ethernet Port Policy on page 4-37
Table 4.14 describes the fields
Creating an Ethernet Port
for more details.