Creating A Network Policy - Symbol WS5000 series Reference Manual

4.3.5 Creating a Network Policy

To create a network policy, follow these steps:
1. From the WS5000 Series Switch GUI main window, select Create > Network > New Policy. The
system launches Create a New Network Policy Wizard
Figure 4.21 Creating a Network Policy—Naming the Policy (and Optionally, Choosing a Template)
2. Enter a name and description for the new Network Policy, then if desired, select Use an existing
Network Policy as a template.
Note Currently, the interface type is always "Access Port". That said, the Input
Policy evaluation is performed by the Access Port before it sends a packet (received
from a wireless device) to the switch.
3. Click Next. A panel for selecting an Input Policy is displayed.
Input Policies define how to filter incoming packets. Select an Input Policy, or to create a new Input
Policy, click Create... See Creating a Network Input Policy on page 4-15
Using the WS5000 Series Switch GUI
for more details.
4-19