Creating A Wlan - Symbol WS5000 series Reference Manual

4.4.3.1 Creating a WLAN

To define a WLAN, follow these steps:
1. From the WS5000 Series Switch GUI main window, select Create > Access Port > WLAN. The system
launches the WLAN Wizard.
Figure 4.37 Creating a WLAN—Naming the WLAN (and Optionally, Choosing a Template)
2. Enter a name and description for the new WLAN, then if desired, select Use an existing WLAN as a
template.
3. Click Next. A panel for configuring ESS ID, MU associations, and WLAN network addresses is
displayed.
4. Configure the ESS ID, mobile unit association and WLAN network address controls, as displayed in
Figure 4.38 and described in
2, some components may already be defined.)
Figure 4.38 Creating a WLAN—Configuring ESS ID, MU Association and WLAN Network Address Controls
Table 4.12, for the WLAN being created. (If a template was selected in step
Using the WS5000 Series Switch GUI 4-33