How To Use This Guide; Conventions Used In This Guide - Symbol WS5000 series Reference Manual

xiv
WS5000 Series Switch System Reference Guide

How to Use this Guide

This guide will help you implement, configure, and administer the WS5000 Series Switch and associated
network elements. This guide is organized into the following sections:
Table 1 Quick Reference on How This Guide Is Organized
Chapter
Chapter 1, "WS5000 Series
Switch Overview"
Chapter 2, "Installing the
System Image"
Chapter 3, "Automatic
Installation"
Chapter 4, "Using the
WS5000 Series Switch GUI"
Chapter 5, "CLI Command
Reference"
Chapter 6, "Antennas and
Power"

Conventions Used in this Guide

This section describes the following topics:
• Annotated Symbols
• Notational Conventions
Annotated Symbols
Note This symbol signals recommended behavior or reference information that
might be important to consider. It may include tips or special requirements.
IMPORTANT! THIS SYMBOL SIGNALS INFORMATION ABOUT A PROCESS OR CONDITION
!
THAT COULD CAUSE DAMAGE TO EQUIPMENT, INTERRUPTION OF SERVICE, OR LOSS OF
DATA.
Jump to this section if you want to...
Review the overall feature set of the WS5000 Series Switch, as well as the many
configuration options available.
Install the System Image. This includes uploading the system image to a TFTP server,
deleting prior configuration or system files, saving a backup version of the existing
configuration, and uploading the system image file, and restoring the site
configuration file.
Review in depth details about the Command File, its syntax, options, specific
settings, and an example.
Learn about working within the WS5000 Series Switch GUI to perform most daily
administration tasks for the switch and its associated devices.
Review the CLI Command reference for all configuration command details, for when
the administrator will use the CLI intergace instead of the GUI interface.
Review antenna and power settings for numerous field installation demographics.