7. Click Finish to save the new Input Policy and exit the wizard.
4.3.4 Creating a Network Output Policy
To create a network output policy, follow these steps:
1. From the WS5000 Series Switch GUI main window, select Create > Network > Output Policy. The
system launches Create a New Output Policy Wizard.
Figure 4.18 Creating a Network Output Policy—Naming the Policy (and Optionally, Choosing a Template)
2. Enter a name and description for the new Output Policy, then if desired, select Use an existing Output
Policy as a template.
3. Click Next. A panel for adding Classification Groups to the Output Policy is displayed.
Figure 4.19 Creating a Network Output Policy—Adding Classification Groups
Using the WS5000 Series Switch GUI
4-17