Modifying An Access Port Policy - Symbol WS5000 series Reference Manual

4-46
WS5000 Series Switch System Reference Guide

4.4.5.2 Modifying an Access Port Policy

To modify an existing Access Port Policy, follow these steps:
1. From the WS5000 Series Switch GUI main window, select Modify > Access Port > Existing Policy.
The system launches the Access Port Policy Manager.
Figure 4.53 Modifying an Existing Access Port Policy—Access Port Policy Manager
2. This panel lists all available Access Port Policies configured on the system.
fields and options within this panel. To edit a policy, select the policy name in the left pane first.
Table 4.17 Access Port Policy Manager Fields and Controls
Field or Control Description
Name Name of the selected Access Port Policy.
Description Description of the selected Access Port Policy, if available.
Policy Tree Access Port configurations in the policy tree.
Properties Displays a list of access ports that can be adopted by the policy. The list itself is defined
by the Wireless Switch Policy. See
Create Launches the Access Port Policy Wizard to create a new Access Port Policy. See
an Access Port Policy on page 4-41
Delete Removes the selected policy from the system. A dialog appears to confirm this action.
Edit Opens a variation of the Access Port Policy Wizard, for editing it in the same fashion that
it was created. See
Close Closes the Access Port Policy Manager without saving any changes.
Switch Policies on page 4-22
for more details.
Note Default Access Port Policy cannot be deleted.
Creating an Access Port Policy on page 4-41
Table 4.17 describes the
for more details.
Creating
for more details.