Defining/Activating An Emergency Switch Policy - Symbol WS5000 series Reference Manual

4-52
WS5000 Series Switch System Reference Guide
the adopted AP, for each of the radio types.
12. When done, click Next. A Wireless Switch Policy Created Successfully! message panel is
displayed.
13. Click Finish to save the new Wireless Switch Policy and exit the wizard.

4.4.8 Defining/Activating an Emergency Switch Policy

When creating or modifying a Wireless Switch Policy, the policy can be designated at the Emergency Switch
Policy (ESP). There can only be one ESP at a time; a Switch Policy that was previously assigned as the ESP is
replaced when a new ESP is designated.
After designating an Emergency Switch Policy, the 'E' icon in the lower left corner of main window turns red.
You can turn the ESP on and off by clicking the icon. When the ESP is turned off, a previously active Switch
Policy is re-activated as the ESP.
For more details, see Creating a Switch Policy on page 4-47.