Host A Meet Me Conference; Join A Meet Me Conference; Speed Dial - Cisco 8811 User Manual

Host a Meet Me Conference

Host a Meet Me Conference
Procedure
Step 1
Obtain a Meet Me phone number from your system administrator.
Step 2 Distribute the Meet Me phone number to participants.
Step 3 When you are ready to start the meeting, lift the handset to get a dial tone and press Meet Me.
Step 4 Dial the Meet Me phone number.

Join a Meet Me Conference

Procedure
Step 1 Dial the Meet Me phone number that the conference host provides.
Step 2
If you hear a busy tone, the host has not yet joined the conference. In this case, hang up and try your call
again.

Speed Dial

Speed Dial allows you to press a button and enter a preset code to place a call. Before you can use Speed Dial
features on your phone, you must set up speed-dial in the Self Care Portal.
Depending on setup, your phone can support these Speed Dial features:
• Speed-dial buttons: Allow you to quickly dial a phone number from one or more line buttons set up for
• Speed-dial codes: Allow you to dial a phone number from a code (sometimes referred to as abbreviated
You can use also use Speed Dial to reach telephone numbers that require a Forced Authorization Code (FAC),
Client Matter Code (CMC), or additional digits (such as a user extension, a meeting access code, or a voicemail
password). These numbers usually require you to input pause characters in the digit string.
Related Topics
Pause in Speed Dial, on page 71
Cisco IP Phone 8800 Series User Guide
70
speed dialing.
If your system administrator has set up the Line Status feature, you can monitor the status of a speed-dial
line by using the line status indicators.
dialing).
Advanced Calling Features