Host Meet Me Conference; Join Meet Me Conference; Mobile Connect - Cisco 6921 User Manual

Calling Features

Host Meet Me Conference

Procedure
Step 1
Obtain a Meet Me phone number from your system administrator.
Step 2 Distribute the Meet Me phone number to participants.
Step 3 When you are ready to start the meeting, lift the handset to get a dial tone and then press Meet Me.
Step 4 Dial the Meet Me phone number.

Join Meet Me Conference

Procedure
Step 1 Dial the Meet Me phone number provided by the conference host.
Step 2
If you hear a busy tone, the host has not yet joined the conference. In this case, hang up and try your call
again.

Mobile Connect

Mobile Connect allows you to use your mobile phone to handle calls associated with your desk phone number.
To set up Mobile Connect, use the User Options web pages to set up remote destinations and create access
lists to allow or block calls from specific phone numbers from being passed to the remote destinations.
When you enable Mobile Connect:
• Your desk phone and remote destinations receive calls simultaneously.
• When you answer the call on your desk phone, the remote destinations stop ringing, disconnect, and
• When you answer the call on one remote destination, the other remote destinations and desk phone stop
Related Topics
Create Access List, on page 95
Add New Remote Destination, on page 94
display a missed call message.
ringing, are disconnected, and a missed call message is shown on the other remote destinations.
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 User Guide for Cisco Unified Communications Manager 9.0 (SCCP
Host Meet Me Conference
and SIP)
67