Disconnect A Bluetooth Accessory; Delete A Bluetooth Accessory; Usb Headsets - Cisco 8811 User Manual

Disconnect a Bluetooth Accessory

Disconnect a Bluetooth Accessory
For Cisco IP Phone 8845, 8851, 8861 and 8865 only. Cisco IP Phone 8851NR does not support Bluetooth.
Procedure
Step 1
Press Applications
Step 2 Select a Bluetooth accessory and then press Disconnect.

Delete a Bluetooth Accessory

For Cisco IP Phone 8845, 8851, 8861 and 8865 only. Cisco IP Phone 8851NR does not support Bluetooth.
Procedure
Step 1
Press Applications
Step 2
Select a Bluetooth accessory and press Delete.
The Bluetooth accessory disconnects (if it was connected) and does not display on the Accessories list.

USB Headsets

For Cisco IP Phones 8851, 8851NR, and 8861.
USB Headsets are also supported by Cisco IP Phone 8865.
Your phone supports USB headset devices attaching to all USB ports including side USB, back USB, and
Key Expansion Module USB ports.
For a list of supported headsets, see
headsets.html.
USB headsets not listed above may not function properly when attached to the USB port. For more information,
see the documentation from your USB headset manufacturer.
When using USB headsets with your phone, these conditions apply:
• The priority of USB headset over Bluetooth or analog headsets depends on the connected state of the
• During a call using headset, the audio path changes automatically if you plug in a USB headset but does
• The phone displays an appropriate message when you plug in the USB headset or adjust the volume
Cisco IP Phone 8800 Series User Guide
120
.
.
headset (only one headset can be connected at a time).
not change automatically if you plug out a USB headset.
using the phone volume control key.
http://www.cisco.com/c/en/us/products/unified-communications/ucphone_
Accessories