Add A Bluetooth Accessory - Cisco 8811 User Manual

Add a Bluetooth Accessory

For more information, see the documentation from your Bluetooth headset manufacturer.
For a list of supported headsets, see
headsets.html.
While using Bluetooth headset, there can be potential interference issues. Therefore Cisco recommends that
you reduce the proximity of other 802.11b/g devices, Bluetooth devices, microwave ovens, and large metal
objects.
For a Bluetooth wireless headset to work, it does not need to be within direct line-of-sight of the phone, but
some barriers, such as walls or doors, and interference from other electronic devices, can affect the connection.
Add a Bluetooth Accessory
For the Cisco IP Phone 8845, 8851, 8861 and 8865 only. The Cisco IP Phone 8851NR does not support
Bluetooth.
Before you add a Bluetooth accessory, it must be discoverable by the phone. Look for a flashing LED on a
Bluetooth accessory as an indication that it is discoverable. For more information, see the documentation from
the Bluetooth accessory manufacturer.
Procedure
Step 1
Press Applications
Step 2 Select Bluetooth.
Step 3 Select Add Bluetooth Accessory.
The phone searches for discoverable accessories that are supported. When an accessory is found, it is added
to the list in the Adding Bluetooth Accessory screen.
Step 4 Select the accessory and press Connect.
The phone automatically attempts to connect the accessory using a Bluetooth device PIN of "0000".
Step 5
If your accessory requires a different PIN and the Adding PIN screen appears, enter the PIN for your accessory.
When the connection completes, a checkmark appears next to the connected accessory.
When Bluetooth is turned on, the Bluetooth active icon
Cisco IP Phone 8800 Series User Guide
118
◦ Change the headset volume for a call
◦ Redial
◦ Caller ID
◦ Reject
◦ Divert
◦ Hold and Accept
◦ Release and Accept
http://www.cisco.com/c/en/us/products/unified-communications/ucphone_
.
appears on the phone screen header.
Accessories