Record A Chaperoned Call; Uniform Resource Identifier Dialing - Cisco 8811 User Manual

Advanced Calling Features
When the chaperone hangs up the call, the entire conference ends.
The chaperone can perform only the following tasks while chaperoning the call:
• Record the call.
• Conference in one participant. A chaperone can conference the first participant only; subsequent
• End the call.

Record a Chaperoned Call

Procedure
Step 1
Answer an incoming call.
Record displays if the system determines that the call must be chaperoned and recorded.
Step 2
Press Conference
Step 3
Enter the phone number for the party you want to add and press Call.
Step 4 When the called party answers, press Conference.
The conference begins.
Step 5
Press Record to begin recording the conference call.
Alternatively, you can begin recording the call before the conference call is established. In this case, press
Conference after answering the incoming call. The call gets put on hold automatically, and the recording
stops while you set up the conference call. The recording restarts automatically when the conference call is
established.
Step 6
Press End Call to end the chaperoned call; all parties are disconnected.

Uniform Resource Identifier Dialing

You can place calls using Uniform Resource Identifier (URI) Dialing, using the alphanumeric URI address
as a directory number; for example, bob@cisco.com. You must enter the URI address to select the contact.
The phone screen displays the call information for the URI call. The phone stores the URI call information
in the Call History and the Details page. When you receive a call with a URI address, the URI address is stored
in your Call History. Press Redial to call the most recently dialed URI address.
Depending upon how the administrator configures your phone, you may see either the URI or the Directory
Number (DN) displayed for the incoming call alerts, call sessions and call history. If the phone is set to display
the DN but only the URI is available, then the URI displays. If the phone is set to display the URI and only
the DN is available, then the DN displays.
URI calls cannot be placed using the soft keypad.
Note
participants can be added to the conference only by the other participants in the conference.
to create a conference call.
Record a Chaperoned Call
Cisco IP Phone 8800 Series User Guide
83