Maintenance Instructions; Recycling The Product - Zodiac Edenpac 4D Instructions For Installation And Use Manual

7. MAINTENANCE INSTRUCTIONS

Tasks to be carried out by a qualified and authorised person:
The following operations must be carried out at least once a year:
• Clean the evaporator at the back of the heat pump
- Never use a high-pressure cleaner for this operation -
• Check the settings.
• Check safety devices.
• Check the presence of refrigerant
• Check electrical connections and terminals
• Check earth connections.
• Check sealing of the cooling circuit on the EdenPAC 6D.
• Do not use solvents to clean the outside of your unit, PSA NET offers an optional specific cleaning kit.
Before working on the appliance, ensure that the power supply is disconnected and secured. All interventions must be carried
out by persons who are qualified and authorised to work on this type of equipment .

8. RECYCLING THE PRODUCT

Please refer to the paragraph with the
(with a soft brush and gentle water spray)
(check the pressure gauge needle with the compressor switched off).
(retighten the supply cable terminals)
IMPORTANT
17
.
symbol at the end of the instructions.
.