Throttle Linkage - Phoenix Model Sonic High Wing Instruction Manual

Silicone tube
Silicone tube
Elevator servo
Rudder servo

throttle linkage

Throttle servo
• Install the elevator pushrod in fuselage. Thread a
nylon clevis at least 6mm onto the pushrod. Route
it to the elevator, attach clevis to horn and secure
using small piece of silicone tubing.
Install the rudder pushrod in fuselage. Thread a
•
nylon clevis at least 6 mm onto the pushrod. Route
it to rudder, attach clevis to horn and secure using
small piece of silicone tubing.
• Trim and attach the pushrod to the servos using
fast loc connectors.
• Install a metal connector onto the rudder servo
arm and connect the nose wheel steering
pushrod to it.
• Attach throttle pushrod to throttle servo arm using
a metal connector. Use two wood blocks to hold
the pushrod securely.
8