Collar
To muffler
80mm
To muffler
Down thrust 2
0
fuel tank installation
To carburator
engine installation
2.5mm
To carburator
6
•
Install nose wheel using supplied wheel collars.
•
Assemble the fuel tank.
•
Put the fuel tank in the fuselage using foam rubber
to cushion the tank, and route the fuel lines out
the hole in the firewall.
. Insert the Z - bend of the throttle pushrod into the
throttle arm of the engine. See the "high throttle"
photo on page 9.
. Istall the engine of your choice using the Philip
head screws. Make sure the engine is pointing
straight ahead or pointing a little to the right, i. e.
with right thrust. Mark the locations of the screws
and drill mounting holes with a drill bit that is
slightly smaller than the screw threads. Test to get
the right size drill bit before drilling holes in the
engine mount.
Right thrust 2
0