Installing The Tma 1600-Iii - Microtek ArtixScan 3200XL User Manual

Tabloid-size scanner with a 12" x 16.9" scan bed, 3200 x 6400-dpi optical resolution, 4.2 maximum optical density

Hide thumbs Also See for ArtixScan 3200XL:

Table of Contents

Before starting your first scan, you have to install the TMA 1600-III first on your

scanner. To install your TMA 1600-III, follow the steps below:

1. Check to make sure that the scanner power is switched off.

2. Attach the TMA 1600-III by sliding the posts at the rear of the TMA 1600-III into

3. Plug the connector of the TMA 1600-

ArtixScan 3200XL User Guide

Installing the TMA 1600-III

the holes.

III into the scanner's 15-pin

accessory port.

TMA 1600-III

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the ArtixScan 3200XL and is the answer not in the manual?