Step 3: Unlocking The Scanner - Microtek ArtixScan 3200XL User Manual

Step 3: Unlocking the Scanner

Before you can operate the scanner, you will need to unlock the scanner.
To unlock the scanner, follow the steps below:
1. Remove the yellow "Step 3"
2. Look for the unlocking screw at
3. Using a screwdriver, push and
Shipping the Scanner
If you have to transport the scanner, you will need to lock the scanner back.
Follow the steps below:
1. Turn off the scanner.
2. Turn the scanner back on.
3. Turn off your scanner.
6 ArtixScan 3200XL User Guide
sticker from your scanner.
the bottom of the scanner.
turn the locking screw
counterclockwise to the unlock
position.
When successfully unlocked, the
screw will push out a little,
protruding slightly from the bottom of the
scanner.
When the indicators on the front
of your scanner stop blinking,
use a screwdriver, and then push
and turn the locking screw
clockwise to the locked position.
When the screw has been
tightened, this indicates that your
scanner is locked.