Microtek ArtixScan 3200XL User Manual page 23

Pertains to how
your monitor
displays color,
relative to the RGB
Destination color
space
Color Matching
features
Improves the
contrast and
saturation of an
image
Immediately updates the Preview window image
when a new setting is selected. This will reflect
colors consistent with the newly selected profile
- Click the Skip button to exit the "Calibration Reminder" window. Clicking
the Skip button allows you to use the factory default ICC profile for your
scanner.
Note: If your scanner does not include IT8 calibration targets, disregard
the Calibration reminder window whenever it appears, and click the
Skip button always.
- Click the Calibrate button to run the Microtek Scanner ICC Profiler (MSP)
program to perform color calibration and to customize the ICC profile for
your scanner. After finishing with calibration, relaunch ScanWizard Pro.
Note: The MSP program should be installed before you perform color
calibration for your scanner. For details on how to install the MSP program
and how to use it to calibrate the scanner, refer to section of the manual
titled "Microtek Calibration Kit".
• Next, you will be prompted to set up color matching for your scanner. If you
are not sure about what to do, simply click the OK button to accept the
settings. You can always change the settings at a later time.
For more information, see the Color Matching Setup section in the
ScanWizard Pro Reference Manual in the Microtek software CD.
ArtixScan 3200XL User Guide 23