Positioning Transparent Film - Microtek ArtixScan 3200XL User Manual

To scan transparent film, use the templates and U-shaped Ruler (Calibration Ruler )
included with your scanner package. There are four types of templates – 35mm
Slide Template, 35mm Filmstrip Template, 120 Film Template, and 4" x 5" Film
Template. Use the template that correctly matches the film type to be scanned. The
use of the individual film template is explained in the succeeding pages of the
manual.
The Black Plate
Light from the TMA 1600-III and other ambient light during scanning may result in
overexposed images. The Black Plate is designed to work with 120 film and
reflective originals. To ensure correct exposure and optimal image quality during
scanning, the Black Mat should be used to shield unwanted light out. Two kinds of
Black Plates are available with your scanner package.
Take note of the following before using the Black Plate.
1. The Black Plate may become dirty over time and with prolonged use. To clean the
2. A protective film covers the Black Plate during shipping and prevents it from
10 ArtixScan 3200XL User Guide

Positioning Transparent Film

plate, use a white cotton cloth dipped in some water, and gently wipe the plate
surface. This ensures that the Black Plate is in optimal condition at all times.
being scratched. When peeling the film from the plate, be careful not to tear or
bend the Black Plate.