12.8
Removing the front rider's seat
12.9
Mounting the front rider's seat
12.10
Removing the bag carrier
SERVICE WORK ON THE CHASSIS 12
Warning
Danger of accidents The seat can come loose
from the anchoring if it is not mounted correctly.
–
After assembly, check whether the seat is cor-
rectly locked and cannot be pulled up.
–
Finally, check that the passenger seat is correctly mounted.
Preparatory work
–
Remove the passenger seat. (
Main work
–
Raise the rear of the front rider's seat, pull it toward the rear,
and remove it upward.
H02676-10
Main work
–
Attach the front rider's seat in area
–
Finally, check that the front rider's seat is correctly mounted.
H02677-10
Finishing work
–
Mount the passenger seat. (
–
Remove screws
–
Take off the bag carrier.
F02810-10
p. 54)
A
and lower at the rear.
p. 54)
1
with the bushings.
55