Network Connection Setup - Fuji Xerox DocuPrint CP116 w User Manual

• Network Connection Setup

Windows Vista and Windows Vista 64-bit Edition
1
Click Start  Control Panel
2
Click Add a printer.
3
Click Add a network, wireless or Bluetooth printer.
4
Select a printer or click The printer that I want isn't listed.
If you have selected your printer, go to step 7.
If you have clicked The printer that I want isn't listed, go to step 5.
5
Select Add a printer using a TCP/IP address or host name, and then click Next.
6
Select TCP/IP Device from Device type, and enter the IP address in the Hostname or IP address box, and
then click Next.
If the User Account Control dialog box appears, click Continue.
NOTE:
• If you are an administrator on the computer, click Continue; otherwise, contact your administrator to continue the desired
action.
7
Click Have Disk to display the Install From Disk dialog box.
8
Click Browse, and then select the extracted setup information (.inf) file in "Getting the Driver File" on page 41.
9
Click Open.
10
Click OK.
11
Select your printer name, and then click Next.
12
To change the printer name, enter the printer name in the Printer name box.
To use this printer as the default printer, select the Set as the default printer check box.
13
Click Next.
Installation starts.
14
Upon completion of the driver installation, click Print a test page to verify installation.
15
Click Finish.
Windows Server 2008 and Windows Server 2008 64-bit Edition
NOTE:
• You must log in as an administrator.
1
Click Start  Control Panel
2
Click Add a printer.
3
Click Add a network, wireless or Bluetooth printer.
4
Select a printer or click The printer that I want isn't listed.
If you have selected your printer, go to step 7.
If you have clicked The printer that I want isn't listed, go to step 5.
5
Select Add a printer using a TCP/IP address or host name, and then click Next.
44 Printer Connection and Software Installation
 Hardware and Sound
 Hardware and Sound
 Printers.
 Printers.