Fuji Xerox DocuPrint CP116 w User Manual page 58

• For Windows 8, Windows 8 64-bit Edition, Windows 8.1, Windows 8.1 64-bit
Edition, Windows Server 2012, and Windows Server 2012 R2
1
On the Desktop screen, place the mouse pointer in the upper right corner of the screen and move the mouse
down, and then select Settings.
2
Click Control Panel  Hardware and Sound (Hardware for Windows Server 2012 and Windows Server 2012
R2)  Devices and Printers.
3
Click Add a printer to launch the Add Printer wizard.
4
If the printer is listed, select the printer and click Next.
If the printer is not listed, click The printer that I want isn't listed.
Click Select a shared printer by name.
a
Enter the path to the printer in the text box, and then click Next.
b
For example: \\<server host name>\<shared printer name>
The server host name is the name of the server computer that identifies it on the network. The shared printer
name is the name assigned during the server installation process.
If this is a new printer, you may be prompted to install a print driver. If no system driver is available, specify the
location where the driver is available.
5
Confirm the printer name, and then click Next.
6
Perform the following as required, and then click Finish.
• Click Set as the default printer to set this printer as the default printer.
• Click Print a test page to verify installation.
If a test page is printed successfully, the installation is complete.
58 Printer Connection and Software Installation