Fuji Xerox DocuPrint CP116 w User Manual page 33

• Manual SSID Setup
If the installer software is already installed, you can assign the wireless setting by using the Printer Setting Utility.
The following procedure uses Windows 7 as an example.
1
Click Start  All Programs  Fuji Xerox  Fuji Xerox Printer Software for Asia-Pacific  your printer 
Printer Setting Utility.
NOTE:
• The window to select a printer appears in this step when multiple print drivers are installed on your computer. In this
case, click the name of the desired printer listed in Printer Name.
The Printer Setting Utility appears.
2
Click the Printer Maintenance tab.
3
Select Network Settings from the list at the left side of the page.
The Network Settings page is displayed.
4
Enter the SSID under Wireless Setup.
5
Select the network mode from Infrastructure or Ad-hoc depending on your environment.
6
Select the encryption type from Mixed Mode PSK, WPA2-PSK-AES, or WEP.
IMPORTANT:
• Be sure to use one of the supported encryption types to protect your network traffic.
NOTE:
• If you have selected Ad-hoc for the network mode, WEP is the encryption type.
• If you have selected Mixed Mode PSK or WPA2-PSK-AES, enter the password. A password is an encryption key for
WPA and WPA2 encryption which consists of 8 to 63 alphanumeric (and 64 hexadecimal) characters. It may be
described as a key on some access points or routers. For details, refer to the manual supplied with the access point or
router.
7
Click Apply New Settings.
When the Manual SSID Setup is successful, the
and setup for wireless LAN is complete.
(Wi-Fi) LED lights up. The wireless connection is established
Printer Connection and Software Installation 33