Fuji Xerox DocuPrint CP116 w User Manual page 62

• When Using IP Printing
1
Turn on the printer.
2
Make sure that wireless connection is configured properly on your computer and printer.
3
Display System Preferences, and then click Print & Scan.
4
Click the plus (+) sign, and then click IP.
If Add Other Printer or Scanner (Add Printer or Scanner for OS X 10.8) is displayed, select Add Other
Printer or Scanner (Add Printer or Scanner for OS X 10.8), and then click IP.
Proceed to step 5.
5
Select Line Printer Daemon - LPD for Protocol.
6
Enter the IP address of the printer in the Address area.
7
Select the model of your printer for Print Using (Use for OS X 10.8).
NOTE:
• When the printing is set up using IP printing, the queue name is displayed as blank. You do not need to specify it.
8
Click Add.
Adding a Printer on Mac OS X 10.5.8 and Mac OS X 10.6
• When Using a USB connection
1
Turn on the printer.
2
Connect the printer and your computer with the USB cable.
3
Display System Preferences, and then click Print & Fax.
4
Confirm your printer is added to Print & Fax in System Preferences.
If your printer is not displayed, execute the following procedures.
5
Click the plus (+) sign, and then click Default.
6
Select the printer connected via USB from the Printer Name list.
Name, Location, and Print Using are automatically entered.
7
Click Add.
• When Using Bonjour
1
Turn on the printer.
2
Make sure that wireless connection is configured properly on your computer and printer.
3
Display System Preferences, and then click Print & Fax.
4
Click the plus (+) sign, and then click Default.
5
Select the printer connected via Bonjour from the Printer Name list.
Name and Print Using are automatically entered.
6
Click Add.
62 Printer Connection and Software Installation