Table of Contents
Advertisement
Rack - mounting and dismounting
Fujitsu rack systems
PRIMECENTER Rack, DataCenter Rack and the 19 inch standard rack (for Japan) have the
following main features:
●
Mounting systems which can be installed without the need for tools
●
Mounting systems with the facility for length adjustment, which guarantees alignment to various
rack depths.
PRIMECENTER Rack and DataCenter Rack offer enhanced cable management in the side area of
the rack.
For PRIMECENTER Racks and DataCenter Racks:
i
Installation of the rails in the various racks is described in the next sections. Installation of
the cable management is described in detail in the technical manual for the particular rack.
3rd party rack
The following edge requirements must be met:
– Installation dimensions (see following illustration).
Key:
●
1 front of rack
●
2 rear of rack
●
A rack depth (comparison PRIMECENTER Rack 940/1000/1100 mm)
●
B Rack width (comparison PRIMECENTER Rack 700 mm)
●
C clear width of the 19 inch installation level
●
C1 front 19 inch installation level
●
C2 rear 19 inch installation level
●
D space for cabling (cable space depth) and air conditioning
●
E space for front panels assembly and air conditioning
●
F space for carrying system right and left
●
P rack installation depth
●
a1 mounting rail front left
●
a2 mounting rail front right
●
b1 mounting rail rear left
●
b2 mounting rail rear right
24
Fujitsu Technology Solutions
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
